网上投注平台介绍-四川11选5网上投注-大发888娱乐代理

首頁(yè)» 往期文章» 2010» Issue 4» 石油工程與機(jī)械

Petroleum Science >2010,??Issue 4:??530-535 DOI: https://doi.org/10.1007/s12182-010-0104-y

The productivity evaluation model and its application for fi nite conductivity horizontal wells in fault block reservoirs Open?Access

文章信息

pdf下載
作者：Jiang Hanqiao,Ye Shuangjiang,Lei Zhanxiang,Wang Xing,Zhu Guojin and Chen Minfeng
作者單位：

Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China;Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China;Research Institute of Petroleum Exploration and Development, PetroChina, Beijing 100083, China;Research Institute of China National Offshore Oil Corporation, Beijing 100027, China;Research Institute of China National Offshore Oil Corporation, Beijing 100027, China;Key Laboratory of Petroleum Engineering, Ministry of Education, China University of Petroleum, Beijing 102249, China

投稿時(shí)間：2010-03-05
引用方式：Jiang, H., Ye, S., Lei, Z. et al. Pet. Sci. (2010) 7: 530. https://doi.org/10.1007/s12182-010-0104-y

文章摘要

It is very diffi cult to evaluate the productivity of horizontal wells in fault block reservoirs due to the infl uence of fault sealing. On the basis of the method of images and source-sink theory, a semianalytical model coupling reservoir and fi nite conductivity horizontal wellbore fl ow dynamics was built, in which the infl uence of fault sealing was taken into account. The distribution of wellbore fl ow and radial infl ow profi les along the horizontal interval were also obtained. The impact of the distance between the horizontal well and the fault on the well productivity was quantitatively analyzed. Based on this analysis, the optimal distance between the horizontal well and the fault in banded fault block reservoirs could be determined. According to the fi eld application, the relative error calculated by the model proposed in this paper is within ±15%. It is an effective evaluation method for the productivity of horizontal wells in fault block reservoirs. The productivity of the horizontal well increases logarithmically as the distance between the horizontal well and the fault increases. The optimal distance between the horizontal well and the fault is 0.25-0.3 times the horizontal well length.

關(guān)鍵詞

    Fault block reservoir, horizontal well, finite conductivity, productivity evaluation, well location design