Petroleum Science >2014,??Issue 4:??550-562 DOI: https://doi.org/10.1007/s12182-013-0371-0
Progression of injectivity damage with oily waste water in linear flow Open?Access
文章信息
作者：Jin Lu and Wojtanowicz Andrew K
作者單位：
InPetro Technologies Inc., 9800 Centre Parkway, #860, Houston, TX 77036, USA;Craft & Hawkins Department of Petroleum Engineering, Louisiana State University, Patrick F. Taylor Hall, Room 2160B, Baton Rouge, LA 70803, USA
投稿時(shí)間：2013-08-20
引用方式：Jin, L. & Wojtanowicz, A.K. Pet. Sci. (2014) 11: 550. https://doi.org/10.1007/s12182-013-0371-0
文章摘要
Numerous laboratory experiments and field cases show that even very small amount of oil in injected water can cause severe injectivity damage. Although injectivity decline caused by oil droplets has been studied experimentally, there is still lack of an easy-to-use and widely accepted model to predict the decline behavior. In this work, we developed an analytical model to predict the time-dependent progress of the water permeability reduction in linear flow by analyzing experimental data obtained from linear core flooding.
The model considers mass transfer of the oil phase from the produced water to the rock due capture effects by dispersion, advection and adsorption inside the rock. As the captured oil saturation increases, permeability reduces following the relative permeability drainage relationship. The reduction stabilizes when the oil saturation comes to an equilibrium value controlled by oil droplet size and injection velocity. The model is calibrated using published experimental data from prolonged core floods with oil-contaminated waste water. Theoretical runs of the model replicate all the effects known from experimental observations. Resulting from the model is a distributed change of permeability vs. time and distance from the point of injection that can be converted to the overall injectivity damage.
The model considers mass transfer of the oil phase from the produced water to the rock due capture effects by dispersion, advection and adsorption inside the rock. As the captured oil saturation increases, permeability reduces following the relative permeability drainage relationship. The reduction stabilizes when the oil saturation comes to an equilibrium value controlled by oil droplet size and injection velocity. The model is calibrated using published experimental data from prolonged core floods with oil-contaminated waste water. Theoretical runs of the model replicate all the effects known from experimental observations. Resulting from the model is a distributed change of permeability vs. time and distance from the point of injection that can be converted to the overall injectivity damage.
關(guān)鍵詞
-
Produced water injection, injectivity decline, permeability damage, linear flow model, filtration model